Cause 1

Fuel Filter

The fuel filter might be clogged. A clogged fuel filter is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the fuel filter and cause the engine to run roughly. If old fuel was left in the chainsaw, drain the old fuel from the fuel tank and replace the fuel filter.

Cause 2

Carburetor Repair Kit

The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

Cause 3

Carburetor

The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

Cause 1

Carburetor Repair Kit

The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

Cause 2

Carburetor

The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

Cause 3

Spark Plug

The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is defective, the engine may not start. To determine if the spark plug is defective, remove the spark plug and inspect it. If the porcelain insulator is cracked, an electrode has been burned away or damaged, or there is heavy carbon buildup at the electrode, replace the spark plug. Alternatively, if the spark plug hasn’t been replaced in a few seasons, replace it.

Cause 1

Carburetor Repair Kit

The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

Cause 2

Carburetor

The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

Cause 3

Spark Arrestor

The spark arrestor is a small screen that prevents the engine from emitting sparks. Over time, the spark arrestor can become clogged with soot. If the spark arrestor is clogged, the edger may stall or run roughly. To unclog the spark arrestor, remove it and clean it with a wire brush. You can also replace the spark arrestor.